Close Menu
3M Aqua-Pure AP431 Scale Inhibitor Replacement Filter Cartridge
3M Aqua-Pure 7100051432, Scale Inhibitor, 2-3/4 in OD, 10-1/4 in Height, 10 gpm Flow Rate, 100 deg F, 125 psi Maximum
Unicel Filters Sta-rite Cartridge
Unicel Filters SC3-SR137 Replacement Filter Cartridge For Sta-Rite 135TX, 135GPM-TX, 135TXR, PTM-135; 3 oz, 137 sq-ft, 31-1/4 Inch
COMPACT WATER FILTER 3/8"
American Plumber Pentair - Filter - W385-Pr Undersink Compact Filter System o Undersink
d x 12 in h
o Point of use filter cartridges, Has a pressure relief button to relieve the water pressure when changing water filters
o Can be used with a sediment filter to reduce sediment, sand and silt, WMB38 Mounting bracket included
TANK WELLMATE 62 GALLON
WellMate's WM-20 WB tank features corrosion-proof composite construction that require little or no maintenance, plus their light weight makes them easier and less costly to install. All materials meet stringent U.S. Requirements for water components and are NSF and/or FDA listed materials. WellMate continues its tradition of excellence by offering features and benefits steel tanks cannot match. These rustproof WellMate pressure tanks are made with blow molded, fiberglass wrapped, seamless construction. They won't rust, dent, or come apart at the seams because there are no seams, and a rugged base is included. Full five-year limited warranty with a one year replacement labor allowance. This tank now features the quick connector that snaps securely into place and is retained by an H-clip. See the photos below. Note: All tanks are pre-pressurized at 38 PSI, and should always be set 2 PSI below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 PSI differential between cut in and cut out. Product Features Inner liner: blow-molded polyethylene. Outer shell: Filament wound with fiberglass roving and epoxy resin. Bladder: Heavy-gauge polyurethane (Separates air and water). Bottom inlet/outlet assembly: high-impact PVC Air connection: Standard tire valve. Pre-charge: 40 PSI Maximum operating pressure: 125 PSI Maximum temperature: 120 degrees Fahrenheit Connection: 1-1/4" NPTM (Male pipe thread) Quick Connect Manufacturer WellMate Model # WM-20WB Material Fiberglass Capacity 60 gallons Connector 1 1/4" NPTM Drawdown @ 40/60 PSI 16.2 gallons Drawdown @ 30/50 PSI 18 gallons Shipping Weight 55
TANK WELLMATE 120 GAL.
The WellMate WM-35WB is a corrosion-proof well pressure tank that is made with a composite of continuous fiberglass strands sealed with high-grade epoxy resin. They won't rust, dent, or come apart at the seams, and a rugged impact proof base is included. The WellMate WM-35WB comes with a 5 year warranty with a one year replacement labor allowance. Features: Corrosion-proof composite construction Won’t rust in corrosive environments, particularly important in coastal regions Little or no maintenance Longer life, greater flexibility Light weight Replaceable air cell Details Max Temp (°F) 100 Max Pressure (Psi) 125 Drawdown Volume 35.9 Gallons @ 30/50 Setting Diameter 24" Material Of Construction Fiberglass Origin Assembled in the USA Size 1-1/4" Inlet/Outlet Location Bottom Volume 119.7 Gallons Inlet/Outlet Connection 1-1/4" MPT
